Xen ARM with Virtualization Extensions/Stout: Difference between revisions
From Xen
Jump to navigationJump to search
Otyshchenko (talk | contribs) (Created page with "WIP Category:XenARM Category:Developers") |
Otyshchenko (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
This wiki describes how to run Xen on Renesas Stout board with R-Car H2 SoC. |
|||
WIP |
|||
Main information how to deal with Stout board are located at: |
|||
https://elinux.org/R-Car/Boards/Yocto |
|||
https://elinux.org/R-Car/Boards/Stout |
|||
= Prepare U-boot = |
|||
== Get U-Boot sources == |
|||
Clone sources from upstream and checkout on commit 425c0a43fbbec36571f6a03b530695b8b16a841d “Prepare v2019.01-rc3”: |
|||
<pre> |
|||
git clone git://git.denx.de/u-boot.git |
|||
cd u-boot |
|||
git checkout 425c0a43fbbec36571f6a03b530695b8b16a841d -b stout_uboot |
|||
</pre> |
|||
== Apply additional patches == |
|||
Apply the following patch series (PSCI support for r8a7790 SoC): |
|||
https://www.mail-archive.com/xen-devel@lists.xenproject.org/msg44364.html |
|||
== Configure U-Boot == |
|||
<pre> |
|||
export CROSS_COMPILE=<path_to_gcc> |
|||
make stout_defconfig |
|||
make menuconfig |
|||
</pre> |
|||
Set maximum supported CPUs for PSCI to 8: |
|||
<pre> |
|||
ARM architecture ---> |
|||
[*] Enable support for booting in non-secure mode |
|||
(8) Maximum supported CPUs for PSCI |
|||
</pre> |
|||
== Build U-Boot == |
|||
<pre> |
|||
make |
|||
</pre> |
|||
Copy resulting images to tftp directory for the future flashing: |
|||
<pre> |
|||
sudo cp u-boot.img <path_to_tftp_dir>/ |
|||
sudo cp spl/u-boot-spl.bin <path_to_tftp_dir>/ |
|||
</pre> |
|||
[[Category:XenARM]] |
[[Category:XenARM]] |
||
Revision as of 17:36, 17 May 2019
This wiki describes how to run Xen on Renesas Stout board with R-Car H2 SoC.
Main information how to deal with Stout board are located at: https://elinux.org/R-Car/Boards/Yocto https://elinux.org/R-Car/Boards/Stout
Prepare U-boot
Get U-Boot sources
Clone sources from upstream and checkout on commit 425c0a43fbbec36571f6a03b530695b8b16a841d “Prepare v2019.01-rc3”:
git clone git://git.denx.de/u-boot.git cd u-boot git checkout 425c0a43fbbec36571f6a03b530695b8b16a841d -b stout_uboot
Apply additional patches
Apply the following patch series (PSCI support for r8a7790 SoC): https://www.mail-archive.com/xen-devel@lists.xenproject.org/msg44364.html
Configure U-Boot
export CROSS_COMPILE=<path_to_gcc> make stout_defconfig make menuconfig
Set maximum supported CPUs for PSCI to 8:
ARM architecture --->
[*] Enable support for booting in non-secure mode
(8) Maximum supported CPUs for PSCI
Build U-Boot
make
Copy resulting images to tftp directory for the future flashing:
sudo cp u-boot.img <path_to_tftp_dir>/ sudo cp spl/u-boot-spl.bin <path_to_tftp_dir>/
